100M Network Lightning Protector (RJ45) for Intelligent Community water, electricity, gas Table

1,CE,ISO9001,fcc ATC certificate 2,10 year manufacture 3,3 years warranty 4,Supply 1% spare device 5,single-mode 20Km

100M Network Lightning Protector (RJ45)  Network Lightning Protection Device is mainly used in SWITCH, HUB, ROUTERT device and other surge protection.It can protect 10/100M twisted-pair Ethernet interface, suitable for multichannel network interface lightning surge protection.

Ease of installation. Main Fine lines in the video signal-Surge / flow overvoltage protection, a road or road transport interface, fully meet user needs. monitoring works is the preferred product.

Features

Rated discharge current, built-in semiconductor devices, fast response time;

With the flow, over-voltage, ground-clamp protection function

use standard connection, small volume, light;

good structure, easy in installation;

multi-functional protection

Applications

Security monitoring equipment, remote control and transmission

figures public broadcasting system

Intelligent Community water, electricity, gas Table

Computer and network equipment and lightning protection

Complete machine features

Model: ONV-RJ45Connecting form: RJ45Uc maximum sustained voltage: 8VIn nominal discharge current (8/20μs): 5KAMaximum discharge Imax (8/20μs): 10KALimit voltage Up: 20Transmission rate Mbps: 1-170MbpsInsertion loss AE: <0.3dbProtect line RJ45: 1.2.3.6;Shell protect level: IP20;Diemensions:6.5*2.5*2.5 cmResponse time: <25nsShell material: metalProtection Level: Fine-level protectionProtect model: 3 grade filter press, fine-level protectionGround Resistance Ω / diameter: ≤ 4 Ω / 2.5 m²

Installment and Application

1. This products is in series in the I/O port;

2. Protector line (IN) connected with signal channel; the equipment end (OUT) connected with protected input connector;

3. The product’s grounding for lightening port and the machine room’s joined in junk ring;

4. All the connecting should be fastness and connected with reliable electric;

5. Lightning protection should accord with the requirements, the ground wire should be as tubbiness as possible, the ground resistance should be less than 10Ω;

6. Ground wire ≥2.5mm²

Environmental requirements

 temperature: -40 °C to 70 °C

 Relative Humidity: indoor temperature conditions 30% ~ 90%

Order Information

Product Name	Shell specifications	Model
Control/Audio signal Lightning protection device	7*2.5*2.5cm	ONV-RS485

Accessories in the package

User Manual	maintenance card	Qualified Certification	Device
1copy	1copy	1 copy	1 set

100M Network Lightning Protector (RJ45) for Intelligent Community water, electricity, gas Table